Public Area Carbon Filter Face Mask , Anti Pollution Mask With Carbon Filter FFP2

Material of each layer

• Outer layer : Protective pp spun-bonded non-woven
• Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
• Inner layer : Shaped needle punched cotton

Descriptions

MX-2008 FFP2V Dust Mask with two head-straps provides comfortable & secure seal,nose clip individually adjustable nose clip for excellent fit. In compliance with the norm EN 149:2001+A1:2009 ,PPE III CATEGORY and Shell-shaped

3 . Mask CE Quality Standards

1 . Stardard : EN : 149 : 2001 + A1 : 2009

2 . Test Machine : TSI 8130

3 . Test Flow : 95Liters/Min

4 . Test Medium : NACL & DOP

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

​

Warning

• The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
• Use in adequately ventilated areas,which are not deficiency of oxygen.
• Do not use this respirator when oxygen concentration is less than 19.5%.
• Do not use the mask in explosive environment.
• The mask must be fitted correctly to ensure the level of protection expected is achieved.
• The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
• For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.

More pictures

With over ten years of regional manufacturing experience, advanced equipment, from selecting the raw materials to the processing with the imported materials, to testing product, a series of strict management system and clean production environment, we can produce any quantities as your requirements, duplicate your existing package design, and also create a package design that will uniquely brand your company’s product Beijing Silk Road Enterprise Management Services Co.,LTD Beijing Silk Road Enterprise Management Services Co.,LTD specializes in the manufacture of disposable and nonwoven series, such as bouffant caps, face masks, shoe covers, boot covers, lab coats, coveralls, oversleeves, etc.

Suzhou OD Technology Co.,Ltd is a branch factory of Zhangjiagang Lianda Machinery Co., Ltd. Suzhou OD Technology Co., Ltd is a professional manufacture of Mask making machine, like 3 layers disposable protective mask, KN95 Mask with the latest technology. Over 10 years experience on the nonwoven converting machines field.

Our commitment to continuous improvement of our manufacturing processes, enhancing product performance and developing new cost-effective products to meet the demands of various customers and markets. All of our products comply with international quality standards, such as CE, FDA.